Glass Fiber, The oldest and most used in compositesCarbon fiber, most widely used in high performance applicationsKevlar fiber, famous for bulletproof vests

For FFF...

The slicing software is essential for 3D printing as it converts a CAD model into an understandable format for a 3D printer.

Today, we will look at 4 well-known slicing...

Direct drive extruders are combined with the hot end to form a single printhead and push the filament directly into the nozzle.

Bowden extruders have a Bowden tube...

Since the initial launch of the type A530, fabWeaver continues to actively advertise and build brand awareness. The fabWeaver local partners have been constantly...

Today, we will share some tips that users need to know when designing hole shapes for 3D printing with accurate dimensions and positions.

 

FDM 3D printing filament is made possible by processing the pellets from thermoplastic resin.If the pellets could be used directly for printing instead of the filament,...

The slicing software that is used for FFF printing can be rather complicated as there are often many different settings and options.The fabWeaver team conducted some...

Photopolymerization of Resins in SLA 

When the photoinitiator absorbs UV, the molecule splits into two radicals.These radicals combine with monomers to form new radicals...

Many 3D printing users are already aware that the part strength can vary depending on the direction of the printing.

Today, will discuss the fabWeaver team experiment...

DfAM (Design for Additive Manufacturing) is a design approach for manufacturability using 3D printers.This approach emerged along with the introduction of 3D printers,...